HP 9000 Manual page 146

Configuring for a DHCP Server
Setting Up a DHCP Server
Automatic
Allocation
to Bootp
Clients:
Accept
New
Clients:
Address
Lease
Time:
Boot file
name:
Additional
Param-,
eters:
146
If you want this range of addresses to be used
only by HP-UX systems, then unselect this
button, and enter the text:
"HewlettPackard.HP-UX" in the text field
provided.
When using Ignite-UX to set up DHCP, it will set
a class specific to the server, and will set the
dhcp_class_id string to match. For more
detail, see the instl_adm(4) man page.
Leave this option disabled. Enabling it will
cause problems for bootp devices such as
printers and terminals which rely only on their
preconfigured server to respond to their boot
request.
Leave this option enabled.
The lease time should be set sufficiently long so
that if a client system is temporarily out of
service (off) for a time, its lease will not expire
too soon.
Infinite leases will never expire and disable the
IP-address reclamation features of DHCP. For
example: 2 weeks.
You can leave this field blank.
There are many parameters that can be specified
in this screen for such things as the default
routers, time server, DNS server, and NIS
domain. You can specify as much or as little as
you like in this area.
Appendix A