Table of Contents
Advertisement
Loading/Unloading
d
WARNING:
Always turn the auto-idle switch OFF when loading
or unloading the machine. In the auto-idle mode,
speed may automatically increase.
Always select the slow speed mode with the travel
mode switch.
Never steer while driving up or down a ramp as it is
extremely dangerous and may cause the machine to
turnover. NEVER attempt to change directions whilst
positioned on the ramp. If repositioning is necessary,
first move back to the ground or flatbed, modify
traveling direction, and begin to drive again.
The top end of the ramp where it meets the flatbed
is a sudden bump. Take care when traveling over it
as the balance may be lost. If the front attachment is
not fitted, reverse onto the trailer.
Extreme care must be taken when swinging the
upper structure when the machine is on the trailer
flatbed. If the front attachment is fitted, swing slowly
with the arm fully roll-in underneath the boom being
careful not to loose the balance of the machine.
Loading
If the front attachment is fitted, load with the front faced
towards the front, if the front attachment is not fitted,
reverse onto the trailer.
1. Load the machine so that the centerline of the machine
aligns with the centerline of the trailer flatbed.
2. Drive the machine onto the ramp slowly.
TRANSPORTING
6-3
15 ° or less
M1G6-06-002
M107-06-018
Advertisement
Table of Contents
