Table of Contents
Advertisement
Fastening Machine for Transporting
d
WARNING: Fasten the machine frame to the deck
securely with chains and cables. While traveling, loads
may shake around, move forward or backward or to
the sides.
1. Place cog stoppers or blocks in front of and behind the
tracks to help secure the unit.
2. Fasten each corner of the machine and front attachment
to the trailer with appropriate strength of chains or
cables.
Unloading
d
WARNING: The rear end of the flatbed where it meets
the ramp is a sudden bump. Take care when traveling
over it.
IMPORTANT: Make sure that the angle of the boom and
the arm is kept between 90 to 110 ° when unloading
the unit.
Damage to the unit is possible if the arm is kept in a
suspended state during unloading.
1. Travel extremely slowly with the bucket on the ground
and the angle of the arm and the boom kept at between
90 to 110 ° when moving from the edge of the trailer
onto the ramp.
IMPORTANT: When driving the machine over the ramp,
do not allow the machine to hit the ground too hard
with the arm. Possible damage to the hydraulic
cylinders may result.
TRANSPORTING
6-5
M1V1-06-001
M107-06-014
Advertisement
Table of Contents
