Table of Contents
Advertisement
Bucket Types and Applications
ZX225US-5B, 225USLC-5B
Bucket
Hoe Bucket
Bucket reinforcement can
be welded in four places
upon customer's request
Reinforced Hoe Bucket
HD Type (Transverse-
Type-Pin-Used Type)
V-Type Bucket
Ripper Bucket
One Point Ripper
Slope-Finishing Blade
f
NOTE:
Symbols in the above table have the following meanings.
: General excavating
: Light duty excavating
: Rock digging
: Loading work
: Slope-finishing work
– : Not applicable (not warrantable)
Hoe bucket is applicable to the following types of work.
General excavating:
For digging and loading operation of sand, gravel, clay, ordinary earth and so on.
Light duty excavating:
For digging and loading operation of dry, loosened earth, sand, mud and so on.
Their bulk density shall be less than 1.60 t/m
Loading:
For loading operation of dry, loosened earth and sand.
Their bulk density shall be less than 1.10 t/m
Rock digging:
For digging/loading operation of mountain gravels, blasted rock, hard clay, soft rock and so on.
IMPORTANT: Using inapplicable buckets may cause serious damage to the front structure such as boom, arm and
hydraulic cylinders.
SPECIFICATIONS
Bucket Capacity
m
3
PCSA
CECE
(Heaped)
(Heaped)
0.51
0.45
0.80 HD
0.7
0.80
0.7
0.91
0.8
1.10
0.9
1.20
1.0
(Without side cutter)
0.80
0.7
0.91
0.8
0.80
0.7
−
0.50
(Without side cutter)
−
−
as a standard.
3
as a standard.
3
Bucket Width
mm
Application
(With side cutter)
830
1150
1140
1260
1440
1450
1140
1260
1140
Excavating
90 °
V-trenches
800
−
1800
Bank cutting finish
12-8
Front-End Attachment
2.42 m Arm
2.91 m Arm
−
−
−
Advertisement
Table of Contents
