Second Display Transfer Board - HP OMEN X Maintenance And Service Manual

Second display transfer board

NOTE: The second display transfer board spare part kit does not include the cable. The cable is available as
spare part number L65580-001.
NOTE: Liquid metal thermal grease is available as spare part number L65923-001.
Table 6-4 Second display transfer board description and part number
Description
Second display transfer board
Before removing the second display transfer board, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover (see
3. Disconnect the battery (see
Remove the second display transfer board:
1. Disconnect the cable from the ZIF connector on the second display transfer board (1).
2. Remove the two Phillips M2.0 × 2.5 screws (2) that secure the board to the computer.
3. Remove the board from the computer (3).
Reverse this procedure to install the second display transfer board
38 Chapter 6 Removal and replacement procedures for authorized service provider parts
(Preparation for disassembly on page
Bottom cover on page
Battery and speakers on page
26).
27).
32).
Spare part number
L57230-001