Performance Check; Bluetooth Wireless Technology; Pairing Your Therapy Device To Your Bluetooth-Enabled Mobile Device - Philips DreamStation 2 User Manual

Performance check

To initiate a performance check, unplug the device and plug it back in. An error will appear
on the screen if a performance issue is detected.

Bluetooth wireless technology

Bluetooth wireless technology is one method by which you can transfer your therapy
device's data to DreamMapper. DreamMapper is a mobile system designed to help
Obstructive Sleep Apnea (OSA) patients enhance their sleep therapy experience.

Pairing your therapy device to your Bluetooth-enabled mobile device

Note: The blower must be off to allow Bluetooth pairing.
Note: You can only pair your therapy device to one mobile device at any given time.
Note: Pairing works best when your therapy device and mobile device are in the
same room.
Note: The current version of DreamMapper will guide you through these instructions.
Note: After initiating pairing in DreamMapper, you will have 30 seconds to complete
the setup. After this time, it will be cancelled automatically.
Follow the steps below to manually pair to your mobile phone or tablet.
1. With your therapy device powered up, initiate Bluetooth Setup from the DreamMapper
mobile app.
Note: From DreamMapper you may need to select from a list of available Bluetooth
devices. The therapy device will appear as "PR BT XXXX" (XXXX will be the last four
digits of the serial number listed on your therapy device).
2. The pairing code will display on the device.
3. In DreamMapper, confirm the 6-digit pairing code displayed on the therapy device.
Note: When pairing from certain mobile devices you may need to enter the 6-digit
pairing code in DreamMapper. Once entered, pairing will automatically begin.
4. Tap "Pair" to complete pairing. The therapy device displays "Pairing to Device" and then
"Success Bluetooth Device is now Paired".
- 25 -