Philips DreamStation 2 User Manual page 33

# Symbol Feature
4 RAMP PLUS
(Ramp+)
5 and N/A Ramp
6 indicator
Description
The first time RAMP PLUS is activated,
the setting will default to 4. To change
the setting, tap the - or + icons until the
desired starting pressure is displayed.
For faster scrolling, hold the - or + icon
instead of tapping.
The RAMP PLUS pressures range from
4 cmH O to 10 cmH
2 2
increments. Tap confirm or wait 3
seconds to save your setting. The display
will then return to the therapy screen.
Every therapy session thereafter will automatically start RAMP
PLUS with the start of therapy.
Note: There is no need to tap the RAMP PLUS symbol again
unless you want to make a change to the RAMP PLUS pressure
or restart RAMP PLUS.
Note: RAMP PLUS pressure and time can also be adjusted in
the Settings Menu on your main screen if enabled by your home
care provider.
Note: The device goes dark after 60 seconds of inactivity. To
wake up the device, tap anywhere on the display. This will
simultaneously reactivate your RAMP PLUS pressure (if set), or
it will take you to your prescribed minimum pressure level and
continue to automatically adjust your delivered pressure as
needed (if in Auto CPAP mode). Once the display appears, you
can continue to adjust settings as desired.
The therapy on display indicates when ramp is active. The
circle around the therapy display is dotted blue (5) when ramp
is active and solid blue (6) when ramp is not active or therapy
pressure is achieved.
O in 1 cmH O
2
- 29 -