Settings Screens - Philips DreamStation 2 User Manual

Settings screens

When you tap "Settings", you will be able to view the following Comfort and Device settings.
These screens will only display if they are available and enabled on your device through
your provider. Tap "Back" to exit to the Last Session screen.
Comfort settings
Symbol Meaning
RAMP PLUS
(Ramp+)
Humidity
Heated tube
temperature
FLEX
Description
RAMP PLUS allows you to adjust your starting pressure and time for
added comfort when you are trying to fall asleep. In this setting you
can set the time to 15, 30, or 45 minutes. You can also set the pressure
to Off or from 4 cmH O to 10 cmH
2
During the set time, the air pressure will remain at your set starting
pressure unless the device detects an event and identifies the need
to increase your pressure. When RAMP PLUS has concluded, your
prescribed therapy pressure will resume.
Note: RAMP PLUS pressure can also be adjusted on the display screen
during therapy.
You can change the humidification level setting from 0 to 5. This
symbol only displays when humidification is enabled.
You can change this setting from 0 to 5. This symbol only displays
when optional heated tube is connected.
This allows you to adjust the level of air pressure relief that you feel
when you exhale during therapy. Your home care provider can enable
or disable this feature. When your provider enables Flex, a level will
already be set for you on the device. You change the setting between
Off, 1, 2, and 3. The setting of "1" provides a small amount of pressure
relief, with ''2'' and ''3'' providing additional relief.
O in 1 cmH O increments.
2 2
- 33 -