Figure 8 Main Screen; Figure 9 Startup Guidance; Figure 10 Shutdown Guidance; Figure 11 Screen Select Menu - Mitsubishi Electric 1100B Series Owner Technical Manual

2.2.1 MENU
Refer to Figure 2.26 for the SCREEN MENU tree.
A) MAIN MENU (Figure 8)
The LCD panel indicates power flow and measured values, while also showing the start/stop
function. The LCD panel also allows the user to verify the status and operation of the UPS
Module.
The following will be displayed when the START/STOP key on the SCREEN SELECT MENU
(Figure 2.5) is pressed (in the OPERATION MENU):
1) Startup/Shutdown Guidance (Figure 9, Figure 10)
This display indicates the Startup and Shutdown guidance for the UPS system. If this
operation is PIN protected, the user is required to enter the security PIN before the screen
can be accessed.
When in remote mode, the message "REMOTE operating model" will appear on this
screen. The user cannot operate the start and stop functions without changing the setup
from remote mode to local mode.
When bypass voltage is abnormal, the message "Bypass voltage abnormal" will appear.
- Stop: When the bypass voltage is abnormal, the user cannot transfer from inverter to
bypass line.

Figure 9 Startup Guidance

Follow Startup/Shutdown guidance accordingly.
2) SCREEN SELECT MENU (Figure 11)
This screen shows all screen menus.
1100B SERIES UPS
OWNERS / TECHNICAL MANUAL

Figure 8 Main Screen

Figure 11 Screen Select Menu

MITSUBISHI ELECTRIC 1100B SERIES UPS

Figure 10 Shutdown Guidance

Page Number:
2-2