Room Humidity Control - Panasonic F-YHC12X Operating Instructions Manual

Room humidity control

Louver Direction button
1
Insert the power plug into
a wall socket.
Press
2
Press
● The indicator for the selected mode lights up.
To maintain a pleasant humidity
● "Auto" mode will automatically control operation in order to maintain
a humidity of approximately 55%. (When the humidity becomes less
than 55%, the unit will switch to fan mode.)
To dehumidify quickly
To dehumidify normally
To dehumidify quietly
● When the room temperature rises above a certain level or when the temperature is low, the
airflow will increase automatically as a protective measure, causing the operating noise to
increase. (
3
Press
to choose the air
swing pattern and
louver directions.
To stop operation
Press
● Be sure to wait for 2 minutes before unplugging the power cord.
Important
(The fan will continue to operate for about 2 more minutes after the unit is turned
off to cool down the heater.)
12
Air Swing button
● The dehumidifying louver opens fully and the unit starts to
operate in "Medium" mode.
(The "Med" indicator and Humidity indicator light up.)
to choose the operating mode.
(strongest airflow)
(medium airflow)
page 25)
● Select the dehumidifying louver direction and air swing pattern
and
to point at the location you want to dry out.
(To adjust the air swing and louver directions
● All indicators turn off.
● You can use the timer to turn off the unit after a set time.
(To set the timer
● The fan will continue to operate for about 2 more minutes after
the unit is turned off to cool down the inside of the unit.
Dehumidity button and indicators
page 19)
Power Off/On button
page 16, 17)