Fixing The Dehumidifying Louver To The Desired Angle; If A Louver Becomes Detached - Panasonic F-YHC12X Operating Instructions Manual

Other useful functions
Louver Direction button

Fixing the dehumidifying louver to the desired angle

1
During "Dehumidify" or "Dry Clothes" operation,
Press
2
When the louver is at the desired angle,
Press
● Dehumidifying louver oscillation stops and the Louver
Direction indicator turns off.
● The louver does not oscillate in this condition.
●
Important

If a louver becomes detached

<Attaching the cool air louver (front side)>
● Attach the cool air louver by inserting the
pins on the louver into the matching holes in
the unit.
Cool air louver
Pin
20
to select "Auto" mode.
again.
Do not move the dehumidifying louver manually.
→ To return to the original setting, press the Louver Direction button again and select
the appropriate mode.
Pin
Dehumidifying
<Attaching the dehumidifying louver (back side)>
● Attach the dehumidifying louver by fitting the hole
on the left side of the louver over the pin on the
unit as shown below, and then insert the pin on the
right side of the louver into the hole in the unit.
Dehumidifying
louver
Power Off/On button
"Auto"
louver
(Full range)
Desired
angle
Hole
Pin on the unit