Emptying The Tank; When The Tank Is Full; Removing The Tank / Installing The Tank - Panasonic F-YHC12X Operating Instructions Manual

Emptying the tank

When the tank is full

When the tank is filled up to the
line in the water level window
(about 2.9 litres), the unit
will automatically stop.
● The Full Tank indicator will flash.
(All other indicators will turn off.)
● When the empty tank is returned to the unit,
operation will resume in the same mode as the
previous operation.
(The Full Tank indicator will turn off.)
Removing the tank
1
Slowly pull out the tank.
Hold the unit firmly and pull out the tank by the
handle, being careful not to spill any water.
Handle
Installing the tank
1
Close the water
outlet securely.
● Be sure to securely close the tank cover and water outlet. Failure to do so may cause the water to leak.
Important
● When you remove the tank, do not touch any internal parts of the unit. Doing so may cause a breakdown.
● Be sure to push the tank gently all the way into the unit. Banging the tank in or failing to
push it in securely may cause the unit to not operate. (The Full Tank indicator will flash.) If
this happens, remove the tank and try pushing it in gently once again.
Tank
handle
Carry the full tank carefully
by the tank handle.
How to use
2
Hold down the tank cover,
Open the water outlet and
pour out the water.
Pull the knob to
open the water
outlet.
Open the water outlet,
hold the handle and the
bottom of the tank, and
carefully pour out the
water. Shake the tank
gently to pour out any
remaining water.
2
Push the tank
gently all
the way in.
Push in gently
all the way.
Full Tank
indicator
(flashing)
Water level window
Full line
Water outlet Tank cover
Handle
YHC12X
21