8.1.2
Cooling circuits for stainless steel heatsinks
To ensure an optimum heatsink service life, please note the following recommendation for
stainless steel heatsinks (Power Modules FL and GL, Motor Modules GXL):
• Open or semi-open cooling circuit made of stainless steel or ABS which transfers heat to
• Cooling circuit pipes, fittings made of ABS, stainless steel (Nirosta) or common steel
grey cast iron
>3 m
Dirt trap,
≤ 100 µm
Fig. 8-2
Recommendations for an open cooling circuit
Chassis Power Units Liquid Cooled
SINAMICS S120 Equipment Manual, Edition 04/2007, 6SL3097-2AM00-0BP2
a recooling system via a water-to-water heat exchanger.
(ST37).
Unit 1,
Pump,
stainless
steel
heatsink
P
Cooling circuit and coolant properties
Motor,
stainless steel or
equivalent corrosion-
proof or corrosion-
protected metals
Hose
8.1 Cooling circuits
8-5