1. Introduction
D Establish a security perimeter to prevent operators from approaching the source at
E In all cases, ensure that the means used properly mitigate exposure variables
The active elements in the IF-240 make the surfaces shown in the picture heats up to 45°C
in normal use. This temperature can nevertheless increase to 55°C in extreme use.
It is the responsibility of customers to document their own application and instruct
employees on procedures to avoid contact with these surfaces.
1.3 Warranty information
You will find all the Epson warranty information (duration, scope of warranty ...) on the
general conditions of sale.
6
distances beyond the nominal ocular hazard recommended by the manufacturer.
(characteristics of screens or goggles to choose based on wavelength which operators are
exposed).
Refer to Appendix: Condition of use of backlight for the complete calculation sheet
on minimal distance to respect for each kind of backlight.
Temperature
Figure 1-2: Specific warnings
Part Feeding 7.0 IF-240 Rev.5