Digital Output For Hoppers 1 And 2 - Epson RC+ 7.0 Manual

2.4.4 Digital output for hoppers 1 and 2

A standard M8 four-pins male cable enables transmission of the digital output signal to
hopper. It must be connected as follows:
Connector type (on IF-240 side): M8, 4P, male
Part Feeding 7.0 IF-240 Rev.5
Figure 2-11: Digital output for hoppers
Pin Signal description
(1) -
(2) -
(3) 0V GND
(4) +24VDC
Hopper
-
Digital Output 1
2. Description
15