4. Maintenance and component replacement
4.2.3 Control and cleaning of the platform
Material needed:
- Lint-free cloth
- Isopropanol alcohol
Step 1
Control the surface state of the platform (A) and be particularly careful of the following
points:
- Dirt or spotted surface
- Oily or greasy surface
Step 2
Clean the surface of the platform.
28
If the surface is damaged so as to obstruct vision or the
behavior of parts, its replacement must be preceded.
For more information about maintenance parts, please
WARNING
contact the supplier of your region.
Figure 4-2: Platform
Part Feeding 7.0 IF-240 Rev.5