Replacing The Smartlogger1000 - Huawei SmartACBox-12/1-JP User Manual

SmartACBox 12-In 1-Out Smart AC Combiner Box
User Manual
Figure 7-4 Removing a faulty AC output circuit breaker
Step 5 Install the new AC output circuit breaker on the fastener.
Step 6 Install the fastener for the AC output circuit breaker in the enclosure.
Step 7 Install the wiring copper plates at the bottom of the AC output circuit breaker.
Step 8 Connect the copper bar and cables to the new circuit breaker based on the cable labels.
----End

7.2.3 Replacing the SmartLogger1000

Prerequisites


Procedure
Step 1 Disconnect cables from the faulty SmartLogger1000 and label the cables.
Step 2 Take the faulty SmartLogger1000 out of the monitoring compartment of the SmartACBox.
Step 3 Remove the installation panel from the faulty SmartLogger1000.
Issue 03 (2018-05-15)
The SmartLogger1000 is faulty.
A spare SmartLogger1000 of the same model is available and functional.
Copyright © Huawei Technologies Co., Ltd.
7 Maintenance
65