SmartACBox 12-In 1-Out Smart AC Combiner Box
User Manual
Step 6 Connect the output power cables for the power adapter to the power input port on the
SmartLogger1000 and the power input port on the router.
----End
7.2.7 Replacing the USB Port
Prerequisites
Procedure
Step 1 Disconnect the cable from the USB port, and label the cable.
Step 2 Remove the faulty USB port.
Figure 7-10 Removing a USB port
Step 3 Install the new USB port.
When installing the new USB port, ensure that the rubber ring is in the enclosure.
Issue 03 (2018-05-15)
The USB port is faulty.
A spare USB port of the same model is available and functional.
Copyright © Huawei Technologies Co., Ltd.
7 Maintenance
69