External Optics (Imaging Lens, Illumination Leds, And Aiming Element); Image And Document Capture; Regulatory Information - Motorola SE4750 Integration Manual

External Optics (Imaging Lens, Illumination LEDs, and Aiming Element)

Do not subject external optical components on the SE4750 engine to any external force. Do not hold the engine by
an external optical component. This can place excessive stress in the mechanical joints that secure the
components, which can cause failures such as joint cracking or breaking.

Image and Document Capture

For specific information on image and document capture applications, contact a Motorola sales representative for a
technical document on image capture using the SE4750.

Regulatory Information

The SE4750 imager engine meets the accessible laser light limits for an CDRH/IEC Class 2 laser and IEC Class
1M LED product. The illumination system also meets emission limits of exempt group according to Lamp Eye
Safety Standard. Any product containing the SE4750 can meet these same regulations. Contact a Motorola sales
representative for further details.
Laser products sold in North America must be reported to the U.S. Food and Drug Administration, Center for
Devices and Radiological Health (CDRH) via a Laser Radiation Safety Report (Product Report). For more
information, go to U.S. Department of Health & Human Services - Radiation-Emitting
Please see the U.S. Code of Federal Regulations, 21CFR1040.10 for the specific North American requirements for
laser products. For devices intended for international sale, see the IEC/EN60825-1 standard for the Safety of Laser
Products.
Complies with 21CFR1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24,
2007 and IEC 60825-1 (Ed. 2.0), EN60825-1:2007.
Installation 2 - 5
Products.