Mounting - Motorola SE4750 Integration Manual

2 - 6 SE4750 Integration Guide

Mounting

There are several mounting holes (M1.6x0.35) and locator holes on the bottom of the chassis (see
SE4750 can be mounted in any orientation without degradation in performance.
NOTE Mounting the SE4750 in a non-upright position results in images rotated accordingly in snapshot or video
mode.
When installing the mounting screws, ensure they do not protrude past the mounting hole threads in the chassis;
use 2.1 mm maximum mounting screw thread engagement. Recommended mounting screw torque is 1.25 ±0.25
in-lb.
Notes: Unless otherwise specified:
• Chassis is at ground.
• Holes marked "A#" are engine locating aides.
Holes marked "B#" are threaded mounting holes.
Slot marked "C" is SE4750-SR LSR AIM specific locating aid.
• It is recommended to secure the engine using a combination
of two locating pins and two mounting screws which must
include A1 and B1.
• To ensure mounting compatibility with other engines in the
SE4500 and SE4750 families, the following is recommended:
• Allocate screw holes for A1, A3, A4
• Provide locating pins for B1, B2
• Do not use locating pins for C
• This is a reference drawing and is not intended to specify or
guarantee all possible integration requirements for this engine.
• All dimensions are in mm. All untoleranced dimensions follow a
general tolerance of +/- 0.15 mm.
SE4750-SR LSR AIM Mounting Diagram
Figure 2-4
Figure 2-4). The