Motorola SE4750 Integration Manual page 43

SE4750 Technical Specifications (Continued)
Table 3-6
Item
Vibration
ESD
Laser Safety Class
LED Class
Chassis Temperature
Operating
Storage
Humidity
Maximum Engine Dimensions
Weight
Electrical Interface
NOTE Environmental and/or tolerance parameters are not cumulative. Motorola recommends a thermal analysis
if the application is subject to an extreme temperature environment.
Unpowered SE4750 withstands a random vibration along each of the X,
Y, and Z axes for a period of one hour per axis (6 G rms), defined as
follows:
20 to 80 Hz Ramp up at 0.04 G
80 to 350 Hz 0.04 G
350 Hz to 2 kHz Ramp down at 0.04 G
± 2 kV HBM @ connector
CDRH / IEC Class 2
IEC Class 1M
-30º to 60º C / -22º to 140º F
-40º to 70º C / -40º to 158º F
See Thermal Considerations on page 2-2
95% RH, non-condensing at 60º C
11.8 mm H x 21.5 mm W x 16.3 mm D
0.46 in. H x 0.85 in.W x 0.64 in. D
8.0 grams (0.28 oz)
21 pin 0.3 mm pitch ZIF connector
See Chapter 4, Electrical Interface
Specifications
Description
2
/Hz at 3 dB/octave
2
/Hz
2
/Hz at 3 dB/octave
for more information.
for more information.
3 - 7