Siemens SIMATIC RTU3041C Manual page 25

2 Engineering
11. Select that an additional update cycle is also performed in sleep mode when
the value changes.
12. Then click "Apply".
13. Open the "Digital memory bits" tab.
14. Click on the 0 memory bit.
15. Enable the "Active" checkbox.
16. Assign the name "fillLevel90".
17. Then click "Apply".
18. Click memory bit 1.
19. Enable the "Active" checkbox.
20. Assign the name "critFillLevel".
21. Then click "Apply".
Monitoring of Remote Measurement Points
Entry ID: 109739240, V3.0,
14
16
18
20
06/2021
13
15
17
19
21
25