Creating A Program In The Simatic Rtu3041C - Siemens SIMATIC RTU3041C Manual

2 Engineering

Creating a program in the SIMATIC RTU3041C

In order for the RTU3041C to respond appropriately to events, you must create a
program. Programming is comparable to "FBD" in the TIA Portal.
Program comparison of the current level with a critical value
1. Navigate to the "Program" menu.
2. Assign the name "Critical fill level" to the network.
3. Add a new function block (FB1).
4. Select "Division" as the function.
5. Interconnect the parameters as follows:
–
Dividend: fillLevel (AI0)
–
Divisor: maxVolume (AM0)
–
Quotient: fillLevelPercent (AM1)
6. Add a new function block (FB2) below it.
Monitoring of Remote Measurement Points
Entry ID: 109739240, V3.0, 06/2021
34