Siemens SIMATIC RTU3041C Manual page 50

2 Engineering
12. Configure the IP address and the IPT listener port (55097) of the TeleControl
server:
"TCSB system > "TCM" tab > General> Address TCM 1".
The "55097" must be enabled for communication in your DSL router.
Note
The configuration of the TeleControl Server is now completed.
Note The status "Connected" is only displayed when the TeleControl server has a
connection with the RTU3041C whose configuration data has been transferred to
the runtime system.
Monitoring of Remote Measurement Points
Entry ID: 109739240, V3.0,
12
12
12
12
12
06/2021
12
50