Table of Contents
Advertisement
Moto G (4th Generation)
Level 2 – Service and Repair Manual
Display Assembly
Description
ASSY,HSG,FRNT,WHT
ASSY,HSG,FRNT
MDL,MDL,5.46 FHD DISP LENS ASSY BLK NON
MDL,MDL,5.46 FHD DISP LENS ASSY WHT NON
ASSY,WHITE,LENS DISP 5.5 FHD
ASSY,BLACK,LENS DISP 5.5 FHD
PAD,DISPLAY,TOUCH AREA
PAD,DISP FLX BTB
PROT LNR,CUST MN LENS LINER , DL SIM-BRAZIL
1.
Use cotton swabs and ISP Alcohol to clean
the Display bonding surface. The Display
bonding surface is highlighted in the photo.
// CAUTION //
Display bonding surface cleaning is critical to
the phone's water resistance. You must
thoroughly clean the bonding surface with ISP
Alcohol and allow it to dry completely before
applying 3M AP-111 Adhesion Promoter.
2.
Wait for the ISP Alcohol to dry.
// CAUTION //
Do not use the same cotton swabs to clean
with ISP Alcohol and apply 3M AP-111
Adhesion Promoter. The Display will not
properly adhere to the Housing if the cotton
swabs are reused. The cotton swabs may be
used for 2 applications but then must be
discarded.
3.
Use cotton swabs to apply 3M AP-111
Adhesion Promoter to the Display bonding
surface.
4.
Wait for the 3M AP-111 Adhesion Promoter to
dry.
PAGE 122
Reference #
1.3
1.1
1.5
1.6
--
Motorola Mobility Confidential Restricted:
Do not share without consent from Motorola
Advertisement
Table of Contents
