Lenovo motorola Moto G Service And Repair Manual page 69

Moto G (4th Generation)
Level 2 – Service and Repair Manual
3. Remove the Front Loudspeaker Pad from the
carrier.
4. Place the Front Loudspeaker Pad into the
fixture, using the pins in the fixture to align it.
5. Place the PCB into the fixture over the
Copper Tape, Thermal Spreader, and Front
Loudspeaker Pad, using the pins in the fixture
to align it.
6. Press down on the PCB for 5 seconds to
secure the Copper Tape, Thermal Spreader,
and Front Loudspeaker Pad to the PCB.
7. Remove the PCB from the fixture.
8. Remove the remaining liners from the Copper
Tape, Thermal Spreader, and Front
Loudspeaker Pad.
9. Remove the Rear Loudspeaker Pad from the
carrier.
10. Place the Rear Loudspeaker Pad into the
fixture, using the pins in the fixture to align it.
11. Remove the Display Flex Kapton Tape from
the carrier.
12. Place the Display Flex Kapton Tape into the
fixture, using the pins in the fixture to align it.
PAGE 69
Motorola Mobility Confidential Restricted:
Do not share without consent from Motorola