Table of Contents
Advertisement
Moto G (4th Generation)
Level 2 – Service and Repair Manual
Battery Assembly
Description
ASSY,HSG,FRNT,WHT
ASSY,HSG,FRNT,BLK
TAPE,BAT PULL TAB
ASSY,BAT,GA40,LI POLYMER,SONY,TYP2875 MA
ASSY,BAT WR ALIGN BLCK
TAPE,BAT WIRE,KAPTON
/// WARNING ///
Failure to adhere to Safety Critical Note(s) may
increase risk of rupture, burning, or failure to function
safely when used by the customer. Refer to the Battery
Safety Guidelines.
1.
Remove the Battery Adhesive Liner from the
Front Housing.
2.
Place the Battery into the Battery pocket of
the Front Housing, aligning the top edge of
the Battery to the top edge of the pocket.
3.
Press down on the Battery for 5 seconds to
secure it in the Front Housing.
PAGE 79
// CAUTION //
Handle the Battery Pack with care. If dropped to the
floor, it may be internally damaged and must be
scrapped.
Ensure Battery and its insulation are not damaged (e.g.
scratched, dented, punctured) prior to and throughout
assembly.
Prior to assembly, ensure Battery edges and surfaces
are not dented or deformed, and that fixtures and parts
that will contact the Battery are free of foreign material.
Ensure screws and screwdrivers do not contact the
Battery.
Motorola Mobility Confidential Restricted:
Do not share without consent from Motorola
Reference #
1
--
34
35
33
Advertisement
Table of Contents
