Rear Housing Pad Assembly - Lenovo motorola Moto G Service And Repair Manual

Moto G (4th Generation)
Level 2 – Service and Repair Manual

Rear Housing Pad Assembly

Description
ASSY,HSG,REAR,BLACK,L5,SINGLE SIM SLT
ASSY,HSG,REAR,BLACK,L5
PAD,CONDUCTIVE,MICRO USB TO FPS
PAD,SIDE KEY,BTB
NOTE
The Fingerprint Sensor is only available on the
16 MP model.
1. Remove the Fingerprint Sensor BtB Pad from
the carrier.
2. Place the Fingerprint Sensor BtB Pad on the
Rear Housing in the location shown.
3. Press down on the Fingerprint Sensor BtB
Pad for 5 seconds to secure the Pad to the
Rear Housing.
4. Remove the Display Flex BtB Pad from the
carrier.
5. Place the Display Flex BtB Pad on the Rear
Housing in the location shown.
6. Press down on the Display Flex BtB Pad for 5
seconds to secure the Pad to the Rear
Housing.
PAGE 57
Reference #
3
32
3.3
Motorola Mobility Confidential Restricted:
Do not share without consent from Motorola