Lenovo motorola Moto G Service And Repair Manual page 70

Moto G (4th Generation)
Level 2 – Service and Repair Manual
13. Remove the SD Card Shim from the carrier.
14. Place the SD Card Shim into the fixture, using
the pins in the fixture to align it.
15. Place the PCB into the fixture over the Rear
Loudspeaker Pad, Display Flex Kapton Tape,
and SD Card Shim, using the pins in the
fixture to align it.
16. Press down on the PCB for 5 seconds to
secure the Rear Loudspeaker Pad, Display
Flex Kapton Tape, and SD Card Shim to the
PCB.
17. Remove the PCB from the fixture.
18. Remove the remaining liners from the Rear
Loudspeaker Pad and SD Card Shim.
19. Wrap the Display Flex Kapton Tape around
the edge of the PCB and over the Shield,
removing the remaining liner in the process.
20. Press down on the Display Flex Kapton Tape
for 5 seconds to secure the Kapton Tape to
the PCB and Shield.
PAGE 70
Motorola Mobility Confidential Restricted:
Do not share without consent from Motorola