To 20-Ma Position Transmitter Circuit Board - ABB AV1 Operating Instructions Manual

Item Part No.
1 5400318
2 NKJHA16004
5 1951041
Table 9-20. Positioner Mounting Kit Number 5327321_12
Item Part Number
1 5400266_1 Positioner mounting bracket
2 0.250-20 x 0.750 Screw, socket head (3 req)
3 0.250 Lock washer, reg spring (3 req)
5 0.312-18 x 0.625 Cap screw, hex socket head (2 req)
6 0.312 Lock washer, reg spring (2 req)
7 R6440-005 Type 347 stainless steel wire, 0.300
diameter, 6-in. length
2
8 19934_248 Spacer
2
9 0.190-32 x 1.125 Screw, pan head machine
10 5312449_4 Connecting link, 12-in. length (cut to
fit)
3
11 0.190-32 x 0.875 Screw, pan head machine (2 req)
NOTES:
1. Positioner mounting kits for direct or reverse acting diaphragm actuators and single or double acting piston actuators with linear (reciprocating)
motion.
2. When fastening Item 10 to the drive arm at the first hole (nearest the drive shaft), use Items 8 and 9 and omit one of Item 11.
Table 9-17. Gage Block Assembly Kit No. 258569_3
(for replacement or field addition, Types AV15_3 and AV16)_3)
Qty Description
_ 1 1 Manifold, gage
3 Set screw, socket
hex hdlss cup pnt
4 2 Pipe plug, socket
_
head
(for potentiometric position transmitters (Type AV____1__))
Part No.
6639540_1
Table 9-19. 4 to 20-mA Position Transmitter Circuit Board
Part No.
6639479_1
Valve Stem Diameter 0.375 to 0.750 in. (Fig. 9-1)
Description
Item Part No.
6 1951779_207
7 NBAHA16020
8 NTJHA09030
Table 9-18. Potentiometer
Qty
1 Potentiometer assembly
(Type AV____2 __)
Qty
1 Circuit board
Item Part Number
12 197120_5 Nut, elastic stop (2 req)
13 5311690_1 Adjustable stud, 2.69 in.
14 5311690_2 Adjustable stud, 3.43 in.
21 0.375 Lock washer, med spring (3 req)
22 0.375-24 Nut, hex jam
23 5311687_2 Stem clamp, 0.375 - 0.750-in. dia
25 5311691_1 Clamp plate, 0.375 - 0.750-in. dia
27 0.375-16 x 1.50 Screw, hex skt head cap (2 req)
28 0.375-16 Nut, hex jam (2 req)
29 0.125 dia x 0.750 Groove pin, type 1
ADDITIONAL SPARE PARTS
SUPPORT SERVICES
Qty Description
4 O-rings
3 Screw, hex socket
head cap
3 Lockwasher,
spring
Description
Description
1
Description
9 - 5