ABB AV1 Operating Instructions Manual page 76

SUPPORT SERVICES
Item Part Number
1 5400266_1 Positioner mounting bracket
2 0.250-20 x 0.750 Screw, socket head (3 req)
3 0.250 Lock washer, reg spring (3 req)
5 0.312-18 x 0.625 Cap screw, hex socket head (2 req)
6 0.312 Lock washer, reg spring (2 req)
7 R6440-005 Type 347 stainless steel wire, 0.300
diameter, 6-in. length
2
8 19934_248 Spacer
2
9 0.190-32 x 1.125 Screw, pan head machine
10 5312449_4 Connecting link, 12-in. length (cut to
fit)
NOTES:
1. Positioner mounting kits for direct or reverse acting diaphragm actuators and single or double acting piston actuators with linear (reciprocating)
motion.
2. When fastening Item 10 to the drive arm at the first hole (nearest the drive shaft), use Items 8 and 9 and omit one of Item 11.
Table 9-22. Positioner Mounting Kit Number 5327321 _14
Item Part Number
1 5400266_1 Positioner mounting bracket
2 0.250-20 x 0.750 Screw, socket head (3 req)
3 0.250 Lock washer, reg spring (3 req)
5 0.312-18 x 0.625 Cap screw, hex socket head (2 req)
6 0.312 Lock washer, reg spring (2 req)
7 R6440-005 Type 347 stainless steel wire, 0.300
diameter, 6-in. length
2
8 19934_248 Spacer
2
9 0.190-32 x 1.125 Screw, pan head machine
10 5312449_4 Connecting link, 12-in. length (cut to
fit)
NOTES:
1. Positioner mounting kits for direct or reverse acting diaphragm actuators and single or double acting piston actuators with linear (reciprocating) motion.
2. When fastening Item 10 to the drive arm at the first hole (nearest the drive shaft), use Items 8 and 9 and omit one of Item 11.
ADDITIONAL SPARE PARTS
9 - 6
Table 9-21. Positioner Mounting Kit Number 5327321_13
Valve Stem Diameter 0.750 to 1.000 in. (Fig. 9-1)
Description
Valve Stem Diameter 0.375 to 0.750 in. (Fig. 9-1)
Description
Item Part Number
3
11 0.190-32 x 0.875 Screw, pan head machine (2 req)
12 197120_5 Nut, elastic stop (2 req)
14 5311690_2 Adjustable stud, 3.43 in.
21 0.375 Lock washer, med spring (3 req)
22 0.375-24 Nut, hex jam
24 5312483_1 Stem clamp, 0.750 - 1.00-in. dia
26 5312471_1 Clamp plate, 0.750 - 1.00-in. dia
27 0.375-16 x 1.50 Screw, hex skt head cap (2 req)
29 0.125 dia x 0.750 Groove pin, type 1
1
(for use on Fisher Actuators)
Item Part Number
2
11 0.190-32 x 0.875 Screw, pan head machine (2 req)
12 197120_5 Nut, elastic stop (2 req)
15 5319500_11 Drive stud, 4.59 in.
16 5319500_1 Drive stud, 3.43 in.
17 5328155_1 Stud bracket
18 0.312-18 x 0.500 Screw, hex head cap (2 req)
19 1218-00 Lock washer, shakeproof (2 req)
20 5319524_1 Lock washer, star
1
Description
Description