Appendix B - Quick Start; Introduction; Product Identification (Nomenclature - ABB AV1 Operating Instructions Manual

INTRODUCTION

PRODUCT IDENTIFICATION (NOMENCLATURE)

Position 1 2 3 4 5 6 7
Type A V
_ _ _ _ _
1
2
1
2
3
5
6
7
1
2
0
1
2
3
0
1
2

APPENDIX B - QUICK START

This section is intended for control engineers with in-depth knowl-
edge of positioners and positioner applications. This quick start
only highlights the primary tasks involved in installation and opera-
tion. Section 1 through
tion address installation and operation in more detail.
Table B-1. Nomenclature
8 9
_ _
Characterizable Pneumatic Positioner
Next
Page
Characterizable 4 to 20-mA Input Positioner (actuator moves to 0%
or 100% upon loss of signal)
Input Signal
20.7 to 103.4 kPa (3.0 to 15.0 psig) (Type AV1)
20.7 to 186.2 kPa (3.0 to 27.0 psig) (Type AV1)
4 to 20 mA (standard intrinsically safe Type AV2)
20.7 to 103.4 kPa (3.0 to 15.0 psig), high temperature applications
1
(Type AV1)
20.7 to 186.2 kPa (3.0 to 27.0 psig), high temperature applications
1
(Type AV1)
4 to 20 mA with explosionproof I/P converter (NEMA 7) (Type AV2)
Stroke/Rotary Motion (cam selection)
12.7 to 50.8 mm (0.5 to 20.0 in.) or 45° rotary motion
25.4 to 101.6 mm (1.0 to 4.0 in.) or 90° rotary motion
Manifold (includes filters)/Gage Block
No manifold
Manifold with equalizing valve, filters and gage ports (required for dou-
ble acting actuators with manual override)
Manifold with equalizing valve inoperable (includes filters and gage
3
ports)
Gage block (gage port only)
Position Transmitter
None (must be 0 for Types AV15, AV16 and AV27)
Potentiometric resistive output
4 to 20-mA output
Section 5, in the main body of this instruc-
Characterizable Positioners
1
2
INTRODUCTION
B - 1