Huawei FusionDC1000A Quick Manual page 13

Prefabricated all-in-one data center

Hide thumbs Also See for FusionDC1000A:

Note:

1. The rain and snow cover is secured to the pre-fab. module using three

GB9074_17-88_M10X40_S_ZNAL screws to a torque of 40 N·m. The preceding figure shows the

positions for securing the cover

Remove the four GB9074_17-88_M10X40_S_ZNAL screws if

there is are eaves for the delivered pre-fab. module. Remove the

eaves and install the cover after cleaning eaves.

2. Secure cover component 2 to the pre-fab. module using three

GB9074_17-88_M10X40_S_ZNAL screws, and then assemble cover components 1

and 2 using two GB9074_17-88_M10X40_S_ZNAL screws to a torque of 40 N·m

No.S008 (Optional) Rain And Snow Cover Installation Positio

Name

Drawing No.

Qty Unit

Screw

GB5783-2000_M12×30_S_ZNAL

PCS

Rain and snow cover

DKBA61545321

PCS

Rain and snow

cover component 1 DKBA61568040

PCS

Rain and snow

cover component 2 DKBA61545321

PCS

Apply sealant on the top of the rain and snow cover after it is installed.

Table of Contents