Huawei FusionModule500 Quick Manual page 17

2. Hold down the SW button on the ECC800-Pro for less than 3s to enable the WiFi function.
3. (Optional) Enable the WiFi function on the ECC800-Pro WebUI.
4. Log in to the app.
3.3 Performing Startup Password Authentication
1. Authenticate the startup password on the WebUI.
a) Log in to the ECC800-Pro WebUI as an administrator.
b) Record the values of Barcode and Verify Code in the displayed Startup Password dialog
box.
c) Within 24 hours, inform Huawei technical support of Barcode and Verify Code to obtain
the password. After obtaining the password, enter the password in the Password text box
and click Submit to complete the authentication of the startup password.
d) Choose System Settings > System Parameters > Site Configuration and set System
type to FusionModule500/800.
2. Use the Service Expert app to authenticate the startup password.
a) Download and install the Service Expert app from Huawei AppGallery.
• Huawei AppGallery installed on the PAD: Log in to the Huawei AppGallery client,
search for Service Expert, and tap Install.
• Huawei AppGallery not installed on the PAD: Log in to Huawei AppGallery
(https://appgallery.huawei.com/), search for Service Expert, and tap Install.
b) Hold down the SW button on the ECC800-Pro for less than 3s to enable the WiFi
function.
c) Use the Service Expert app to authenticate the startup password.
3.4 Setting the Date and Time
1. Choose System Settings > System Parameters > Time.
2. Set the time zone, date, and time based on the site requirements or click Obtain Local Time,
and click Submit.
3.5 Creating a Smart Module Layout
1. Choose Home > Plan View, create a smart module in Smart Module View, and set the
layout and device quantity based on the actual smart module scenario.
2. Drag the icons of registered devices and devices on the cabinet list to appropriate positions in
the layout to create a smart module plan view.
3.6 Adding a Southbound Device
1. Choose System Settings > Device Management > Add Device.
2. After you add a device, date, and time based on site requirements or click Auto Discover
Device, the details about the device connected to the smart module are displayed.
3.7 How Can I Add a UPS2000G
1. Log in to the ECC800-Pro WebUI as an administrator, add a UPS2000G-L.
16