Electrolux EWM09312 Service Manual page 18

Description
Insufficient heating during the
washing phase
Overheating during washing
phase (temperature higher than
88°C for more than 5 min.)
Heating element power relay
faulty (inconsistency between
sensing and relay status)
Current leak to the ground
Heating element interrupted
Heating relay sensing faulty
Heating element power relay
faulty (inconsistency between
sensing and relay status)
Technical Support - A.D.L.
Possible fault
• Faulty wiring.
• NTC probe for wash cycle faulty.
• Heating element faulty.
• Main circuit board faulty.
• Faulty wiring.
• NTC probe for wash cycle faulty.
• Heating element faulty.
• Main circuit board faulty.
• Main circuit board faulty.
• Earth leakage between heating element and earth.
• Faulty wiring.
• Heating element for washing interrupted (thermal fuse open).
• Main circuit board faulty.
• Main circuit board faulty.
• Faulty wiring.
• Earth leakage between heating element and earth.
• Main circuit board faulty.
The heating phase is skipped
Safety drain cycle.
Cycle stops with door open
Safety water fill.
Cycle stops with door closed.
The heating phase is skipped
Cycle stops with door locked
Safety water fill
Cycle stops with door closed.
18/70
Action
Machine status
START/RESET
RESET
ON/OFF
RESET
START/RESET
START
---------------- ON/OFF
RESET
RESET
ON/OFF
RESET
599 74 23-12 Rev.00
Reset