Hard-Drive Assembly - Dell D15S Service Manual

Steps
1. Align the bezel and insert the retention tabs on the bezel into the slots on the system.
2. Press the bezel until the retention tabs click into place.
Next steps
1. Install the side cover.
2. Follow the procedure in

Hard-drive assembly

Removing the 2.5 in. hard-disk drive assembly
Prerequisites
1. Follow the procedure in
2. Remove the side cover.
3. Remove the front bezel.
About this task
The following images indicate the location of the 2.5 in. hard-disk drive assembly and provide a visual representation of the
removal procedure.
14 Disassembly and reassembly
after working inside your
before working inside your
computer.
computer.