11. Align and lower the I/O panel into the slot on the system chassis.
12. Replace the single screw (6-32) to secures the I/O panel to the system chassis.
Next steps
1. Install the processor.
2. Install the
memory
modules.
3. Install the heat-sink.
4. Install the
WLAN
card.
5. Install the
solid-state
6. Install the
2.5 in. hard drive
7. Install the
front
bezel.
8. Install the
side
cover.
9. Follow the procedure in
System board layout
1. Video connector
3. CPU power connector (ATX_CPU)
5. Memory slots (DIMM1, DIMM2, DIMM3, DIMM4)
7. Power switch connector (PWR_SW)
9. Media card reader connector (Card_reader)
11. System fan connector
13. M.2 Soild-state drive connector
15. PSU connector
17. Internal speaker connector
19. PCI-e connectors
21. USB Type-C connector
54
Disassembly and reassembly
drive.
assembly.
after working inside your
computer.
2. Intrusion switch connector (Intruder)
4. CPU fan connector
6. M.2 Solid-state drive connector
8. Remote PWR switch connector
10. M.2 WLAN connector
12. SATA 1 connector
14. SATA 2 connector
16. SATA 3 connector
18. SATA power connector
20. Coin cell battery
22. Processor socket (CPU)