Dell D15S Service Manual page 59

Table 6. System setup options—Storage menu (continued)
Storage
Storage Interface
Port Enablement
SMART Reporting
Enable SMART Reporting
Drive Information
SATA-0
Type
Device
SATA-1
Type
Device
SATA-2
Type
Device
SATA-3
Type
Device
M.2 PCIe SSD-0
Type
Device
M.2 PCIe SSD-1
Type
Device
Enable MediaCard
Secure Digital (SD) Card
Secure Digital (SD) Card Read-Only Mode Enable or disable the SD card read-only mode.
Table 7. System setup options—Display menu
Display
Multi-Display
Enable Multi-Display
Primary Display
By default, the AHCIoption is enabled.
Enable or disable the onboard drives.
By default, all the options are enabled.
Enable or disable Self-Monitoring, Analysis, and Reporting Technology
(SMART) during computer startup.
By default, the Enable SMART Reporting option is not enabled.
Displays the SATA HDD type information of the computer.
Displays the SATA HDD device information of the computer.
Displays the SATA HDD type information of the computer.
Displays the SATA HDD device information of the computer.
Displays the SATA HDD type information of the computer.
Displays the SATA HDD device information of the computer.
Displays the SATA HDD type information of the computer.
Displays the SATA HDD device information of the computer.
Displays the M.2 PCIe SSD-0 type information of the computer.
Displays the M.2 PCIe SSD-0 device information of the computer.
Displays the M.2 PCIe SSD-1 type information of the computer.
Displays the M.2 PCIe SSD-1 device information of the computer.
Enable or disable the SD card.
By default, the Secure Digital (SD) Card option is enabled.
By default, the Secure Digital (SD) Card Read-Only Mode option is not
enabled.
Enable or disable the Enable Multi-Display buttons on the computer.
By default, the option is enabled.
System setup 59