Steps
1. Align the SD card reader with the screw holes on the system board and replace the two screws (M6X32).
2. Route the power supply cables through the retention clip on the SD card reader.
Next steps
1. Install the
Optical drive assembly
2. Install the
Hard drive assembly
3. Install the
Front bezel
4. Install the
Side cover
5. Follow the procedure in
Expansion card
Removing the expansion card
Prerequisites
1. Follow the procedure in
2. Remove the
Side cover
About this task
The following images indicate the location of the expansion card and provide a visual representation of the removal procedure.
After working inside your
Before working inside your
computer.
computer.
Disassembly and reassembly
31