Important Information - NEC SL1000 Getting Started Manual

SL1000 Getting Started Guide

Important Information

Please read following instructions carefully and save these instructions.
When using your Telephone System, basic safety precautions should always be followed to reduce
the risk of fire, electric shock and injury to persons, including the following.
【DANGER】-
Incorrect use of the equipment may cause personal injury or death.
☛ IF DAMAGE TO THE UNIT EXPOSES ANY INTERNAL PARTS, DISCONNECT THE
POWER SUPPLY CORD IMMEDIATELY AND RETURN THE UNIT TO YOUR
SUPPLIER.
☛ THIS UNIT IS EQUIPPED WITH AN EARTHED TERMINAL. FOR SAFETY REASONS
THIS PLUG MUST ONLY BE CONNECTED TO AN EARTHED OUTLET THAT HAS
BEEN INSTALLED ACCORDING TO APPLICABLE REGULATIONS.
☛ TO PREVENT POSSIBLE FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR ANY TYPE OF MOISTURE.
☛ THE POWER SUPPLY CORD ON THIS EQUIPMENT MUST BE USED TO DISCONNECT
THE MAIN POWER. ENSURE THAT THE AC OUTLET IS LOCATED NEAR THE
EQUIPMENT AND IS EASILY ACCESSIBLE.
☛ DISCONNECT ALL POWER TO THE EQUIPMENT BEFORE COVER(S) ARE REMOVED.
☛ DO NOT TOUCH THE INTERNAL PARTS OF THE MAIN EQUIPMENT TO
DISASSEMBLY OR CONFIGURE IT. THIS ACTION MAY CAUSE A FIRE, AN
ELECTRICAL SHOCK OR A SYSTEM FAILURE.
NEC CORPORATION DOES NOT TAKE ANY RESPONSIBILITY FOR DISASSEMBLED
OR RECONFIGURED EQUIPMENT.
【WARNING】-
☛ TO AVOID SHOCK OR DAMAGE, DO NOT PLUG IN OR TURN THE SYSTEM POWER
ON BEFORE COMPLETING THE INSTALLATION PROCESS.
☛ AVOID USING A TELEPHONE SYSTEM DURING ELECTRICAL STORM.
☛ USE ONLY COMMERCIAL AC POWER TO PREVENT SHOCK OR FIRE.
☛ DO NOT USE THIS PRODUCT IN PLACE WHERE WATER OR OTHER FLUIDS COMES
IN CONTACT WITH THE EQUIPMENT.
☛ TO PROTECT THIS UNIT FROM STATIC ELECTRICITY, DO NOT TOUCH ANY
EXTERNAL CONNECTORS OF THE UNIT.
☛ IF LIGHTNING CAUSES A FAULT, CONTACT THE DEALER.
☛ WHEN RELOCATING THE EQUIPMENT, FIRST DISCONNECT THE TELECOM
Incorrect use of the equipment may cause personal injury or a serious system
fault.
1