Outgoing Exchange Line Access - NEC SL1000 Getting Started Manual

SL1000 Getting Started Guide
2. Dial 15 01 01, Enter the Extension Number and press DND/CONF key
to Next step.
(e.g. Extension Number: 200 )
3. Enter Extension Name, (e.g. Extension Name: David) using the
keypad.
4. Press Hold key to confirm the entry and step to the next option.
5. Press Mute key several times when you are done to return to the
Program Mode.
6. Press Speaker key to save changes and exit from the Programming
Mode.

Outgoing Exchange Line Access

You may want to change this setting if:

You want a dedicated exchange line for one of the telephones (eg FAX,....)
System Operation:
Each telephone is assigned a Trunk Access Map (TAM) number.
The TAM number is then given the access properties for each of the exchange lines.
The default operation is that all telephones have access to any exchange line.
Program15-06-01
Give the telephones to a Trunk Access Map (TAM) number. You can specify a different TAM number for each
day/night mode. See Changing the Telephone Ringing Assignment for the modes you may be using.
Default Setting:
All telephones have TAM number 1.
1. After Log-In to the Programming Mode.
If you already Log-In the programming mode, skip this operation.
2. Dial 15 06 01, Enter the Extension Number and press DND/CONF key
to Next step.
(e.g. Extension Number: 200 )
3. Enter the TAM Number(1-126) for each mode(1-8), you can overwrite
the current entry.
4. Press Hold key to confirm the entry and step to the next option.
5. Press Mute key several times when you are done to return to the
Program Mode.
6. Press Speaker key to save changes and exit if you are finished.
Program14-07-01
Give each exchange line the access properties for the TAM number.
Default Setting:
Each exchange line (CO1, CO2, CO3 & CO4) has full access (Property type 7) for TAM number 1. Therefore
every telephone can access any of the trunks.
1. After Log-In to the Programming Mode.
If you already Log-In the programming mode, skip this operation.
Operation
Operation
36
15-01-01 TEL200
ExtName-
15-01-01 TEL200
ExtName-David
Display shows;
Program Mode
15-06-01 TEL200
Mode1 Acc-Map1
Display shows;
Program Mode