Forcing The Printer To Print Remaining Data (When Printing Is Halted) - Brother HL-4200CN User Manual

Forcing the Printer to Print Remaining Data
(When Printing is Halted)
If the printer stops receiving data half way through a print job, the printer will wait for a pre-determined
time, during this wait, the control panel will display Data Wait. If you wish to, you can force the printer
to print the data that it has already received. Refer to the following steps for more information.
The default job time-out is 30 seconds. You can set the job time-out to between 5 and 300 seconds on
the control panel. For details about the job time-out function, see List of Menu Items on page 4-6.
Follow the steps below. Use the following control panel buttons.
For details about control panel operations, see Basic Menu Operation on page 4-4.
(The printer is processing)
1
Press the Form Feed/Set button once. The remaining data in the printer is printed out.
2
When processing is finished, the print screen re-appears.
(The print screen. The printer is ready to print.)
5 - 23 TROUBLESHOOTING