Configuring the Printer on a Network
Read this section if you want to configure the printer for a network connection.
Setting an IP Address
This section describes the steps for setting the IP address, subnet mask, and gateway address from the
control panel of the printer.
Follow the steps below.
IP addresses are managed throughout the system as a whole. Specifying the wrong IP address can
affect the entire network. Before you set an IP address, call your system administrator.
To learn how to operate the control panel, see Basic Menu Operation on page 4-4.
Set the IP address acquisition method to Panel.
Ready to Print
Menu:
1:System
Menu:
5:Network
5:Network
Ethernet
5:Network
TCP/IP
TCP/IP
Setup IP Address
Setup IP Address
Setup IP Address
Panel *
Reboot system
to take effect
Continued
(The print screen. The printer is ready to print.)
1
Press the Menu button. The menu screen will appear.
(The menu screen)
2
Press the
3
Press the Form Feed/Set or
4
Press the
5
Press the Form Feed/Set or
6
Press the Form Feed/Set or
The default setting has an * next to it.
DHCP *
7
Press the
8
Press the Form Feed/Set button once.
3 seconds later, the following screen will appear.
button 4 times.
button once.
button once.
button once.
button once.
button once.
PRINTER SYSTEM SETTINGS 1 - 4