Brother HL-4200CN User Manual page 99
Color laser printer
Hide thumbs
Also See for HL-4200CN:
- Service manual (366 pages) ,
- Network user's manual (63 pages) ,
- Quick setup manual (41 pages)
Table of Contents
Advertisement
Symptom
When duplex printing on
non-recommended paper, white spots
appear.
When duplex printing, white spots appear.
When duplex printing on
non-recommended paper, toner appears
scattered and the print result is blurred.
When duplex printing on recommended
paper, toner appears scattered and the
print result is blurred.
When duplex printing on
non-recommended paper, print result
appears bluish.
When duplex printing on recommended
paper, print result appears bluish.
Possible Cause
Action
Adjust the BTR CurrentAdj. setting on the
control panel according to the type of media
that is being used.See BTR CurrentAdj on
page 4-10.
BTR CurrentAdj. setting may not be set to 0
for all media types.
Set the BTR CurrentAdj. to 0 for all media
types, using the control panel. See BTR
CurrentAdj on page 4-10.
Adjust the BTR CurrentAdj. setting on the
control panel according to the type of media
that is being used. See BTR CurrentAdj on
page 4-10.
BTR CurrentAdj. setting may not be set to 0
for all media types.
Set the BTR CurrentAdj. to 0 for all media
types, using the control panel. See BTR
CurrentAdj on page 4-10.
Change the BTR CurrentAdj. setting on the
control panel according to the type of media
that is being used.See BTR CurrentAdj on
page 4-10.
BTR CurrentAdj. setting may not be set to 0
for all media types.
Set the BTR CurrentAdj. to 0 for all media
types, using the control panel. See BTR
CurrentAdj on page 4-10.
TROUBLESHOOTING 5 - 10
Advertisement
Table of Contents
