Method Of Operation; Operating Method Of Tig Welding - Panasonic YC-500WX Operating Instructions Manual

7 METHOD OF OPERATION

7.1 OPERATING METHOD OF TIG WELDING

Set the welding method select
switch located on the operation
panel.
Turn ON the distribution box
switch.
Turn ON the power switch on the
operation panel.
Check the gas flow rate.
Start welding work.
Welding work completed.
Turn OFF the power distribution
box switch.
Be sure to close the plug of the argon gas cylinder after finishing welding work.
MIX TIG
A.C.STD.TIG
A.C.HARD.TIG
A.C.SOFT.TIG
D.C. TIG
Power lamp lights
Cooling fan rotates
Set the select SW to "Gas check"
Set to weld after Gas checking
Draw the torch near to the base metal and press the torch SW
10