Panasonic KX-TVM50 Programming Manual page 128

2.5 System Parameters
Example:
"I have a call for (subscriber's name)".
Value Range
1–3 times
Feature Guide References
2.3.23 Intercom Paging (APT/DPT Integration Only)
Intercom Paging Retry
Specifies the number of times the VPS attempts to page the called party when the called party is busy
or does not answer.
Note
• This setting applies only when the subscriber has enabled "Intercom Paging" in Incomplete
Call Handling Status.
Value Range
1–10 times
Feature Guide References
2.3.23 Intercom Paging (APT/DPT Integration Only)
Caller Recorded Name Announcement Mode
Determines whether or not the VPS announces the caller's name during paging. (In order for the
name to be announced, it must be recorded beforehand.)
Value Range
Disable, Enable
Feature Guide References
2.3.23 Intercom Paging (APT/DPT Integration Only)
Paging Code
Specifies the intercom paging access code required by the PBX.
Note
• Each subscriber's Intercom Paging Group Number is determined his or her COS.
Value Range
All groups, Selective
128 Programming Guide