Panasonic KX-TVM50 Programming Manual page 91

Menu Repeat Cycle
Specifies the number of times the Custom Service menu message will be repeated for the caller.
Value Range
1–3 times
Feature Guide References
2.3.15 Custom Service
Call Transfer Anytime
Specifies the destination to which the call will be transferred.
Note
This parameter should be set to "No" when Subscriber Service is specified as a Custom Service
option and it is desired that digits can be entered very quickly to specify a mailbox. Therefore, in
most cases, "No" is the best setting for this parameter. This is especially true if you do not want
to explain "Call Transfer Any Time" in your Custom Service menu recording.
Value Range
Extn: enables callers to be transferred directly to their intended party by dialling the extension number.
Mbx: enables callers to leave messages in a mailbox by entering the mailbox number.
PIN: enables callers to be transferred directly to the specified party according to the setting for PIN
Call Routing Service by dialling PIN.
No: disables extension transfer and mailbox transfer; only 1-digit entries will function (following the
Custom Service menu)
Feature Guide References
2.3.15 Custom Service
Wait for First Digit
Specifies the length of time that the VPS must wait for the first digit entry in the Custom Service.
When "0" is set, the Custom Service menu is only played, and a key entry is invalid. After the menu
is played, No DTMF Input Operation will function.
Value Range
0 s–10 s
Feature Guide References
2.3.15 Custom Service
Wait for Second Digit
Resolves the problem when the first digit of the extension or mailbox number is the same as one of
the Custom Service menu choices. The VPS waits the specified period of time for a second digit to
2.4 Service Settings
Programming Guide 91