Panasonic KX-TVM50 Programming Manual page 131

Fax Notification Mode
If set to "Mbx", the VPS will leave the number of successfully received fax calls in the Fax Manager's
mailbox.
Example:
"You have 1 FAX message".
Value Range
No: The VPS will not take any action concerning successfully received fax calls.
Extn followed by extension no.: After a fax extension successfully receives a fax call, the VPS will
automatically call the Fax Manager's extension and play a system prompt: "You have 1 FAX
message". The VPS will also leave the total number of received fax calls in the Fax Manager's
mailbox.
Mbx followed by mailbox no.: The VPS will leave the number of successfully received fax calls in the
Fax Manager's mailbox.
Feature Guide References
2.3.20 Fax Management
Disconnect Parameters
Maximum Silence Time
Specifies the length of silence detected by the VPS before the VPS disconnects the call.
Value Range
0 s–60 s
Maximum Continuous Tone Time
Specifies the length of time the VPS waits when a continuous tone is detected before it disconnects
the call.
Value Range
0 s–60 s
Maximum Cyclic Tone Time
Specifies the length of time the VPS waits when a cyclic tone is detected before it disconnects the call.
Value Range
0 s–60 s
2.5 System Parameters
Programming Guide 131