The details of each ID are explained below.
1.
ID: 0x00
Temperature measurement
byte 0
command
A/D value (temperature
byte 1
sensor information)
byte 2
Reserved
byte 3
Reserved
byte 4
Reserved
byte 5
Reserved
byte 6
Reserved
byte 7
Reserved
Field name
Temperature measurement
command
A/D value (temperature
sensor information)
2.
ID: 0x01
byte 0
Reserved
byte 1
Reserved
A/D value (temperature
byte 2
sensor information)
byte 3
Reserved
byte 4
Reserved
byte 5
Reserved
byte 6
Reserved
byte 7
Reserved
Setting value
0x55: Start; 0x0F: Stop
0 to 255
93
Remarks
If bits pot white SW4 is set to the right, temperature
information is acquired from the temperature sensor on
the starter kit by receiving 0x55. If bits pot white SW4
is set to the left, no operation is performed.
This is temperature sensor information from the bits pot
white.
The temperature is displayed on the starter kit using
this A/D value.
AN07-00200-03E