Fujitsu F2MC-8FX Series User Manual page 95

4. ID: 0x03
byte 0 Reserved
byte 1 Reserved
byte 2 A/D value (VR information)
byte 3 Reserved
byte 4 Reserved
byte 5 Reserved
byte 6 Reserved
byte 7 Reserved
Field name
A/D value (VR
information)
5. ID: 0x04
byte 0 LED on/off change command
byte 1 Reserved
byte 2 Reserved
byte 3 LED value
byte 4 Reserved
byte 5 Reserved
byte 6 Reserved
byte 7 Reserved
Field name
LED on/off change
command
LED value
Setting value
0 to 255
Setting value
0x55: Start; 0x0F: Stop
0 to 7 (otherwise 0xFF)
Remarks
This is the response to the ID 0x02 volume value
measurement command. The volume information is
sent as A/D values.
Remarks
This is the LED on/off change command from bits pot
white. If bits pot white SW4 is set to the left, 0x55 is
received, and if the LED value is not 0xFF, the received
LED value is displayed on the starter kit LED.
This is the value of the LED displayed on bits pot white.
when 0xFF is received, the data is invalid.
95
AN07-00200-03E